Grease Trap / Grease Interceptor


  • Required in commercial food preparation areas.

  • The function of a grease trap is to slow the flow of Warm/hot greasy water thus allowing it to cool. As the water cools, the grease and oil separate and float to the top, solids to settle on the bottom of the tank and the cleaner/cooler water flows out to sewer.

 

Above Ground


250lt Grease Trap

 

 

 

 

600lt Grease Trap

 

 

 

 

2000lt Grease Trap

 

 

VP9-2

  • Manufactured from PVC and Polypropylene materials, this tank is suitable for above-ground installations only
  • Standard tanks are fitted with 100mm nb. Inlet and Outlet pipe and 50mm Vent
  • Cirular screw-down access covers are fitted to a top lid that is screw fixed to the tank flange
  • Tank dimensions and pipework positions are nominal and in all cases conform to Trade Waste recommendations
  • When space limitations dictate, equivalent capacity tanks can be manufactured to order
  • *Note: Tanks larger than 250 litres capacity have external bracing fitted. Allow 50mm all round

Downloads

  • Spec Sheet
  • Installation Guidelines
  •  

    Below Ground

     

    1000lt Grease Trap & Cover (cover sold separately)

    1000lt Grease Trap & Cover

     

     

     

     

     

     

     

    Don’t let this happen to you!

    Incorrect below-ground installation.

    Collapsed Grease Trap

    VP9-1

    • Manufactured from PVC and Polypropylene materials, this tank is suitable for below-ground installations
    • The tank must be surrounded with 100mm thick concrete walls and base
    • Standard tanks are fitted with 100mm nb. Inlet, Outlet and Vent pipes
    • Access covers (supplied separately) capable of being removed by one man should be fitted on top
    • Tank dimensions and pipework positions are nominal and in all cases conform to Trade Waste recommendations
    • When space limitations dictate, equivalent capacity tanks can be manufactured to order

    Downloads

  • Spec Sheet
  • Installation Guidelines